COMPORT iPRO USB Recovery — Update a Stuck Device | AMR Performance

Update a stuck COMPORT iPRO over USB — no Wi-Fi pairing needed. This connects straight to the device over the USB cable and tells it to update itself, skipping the COMPORTiPRO Wi-Fi step entirely, so the "will not connect / wrong password" problem does not get in the way.

Before you start

A computer (Windows or Mac) running Google Chrome or Microsoft Edge. This will not work on a phone or in Safari.
A USB cable from the computer to the iPRO device.
The device powered on (plugged into the car).
Your 2.4 GHz Wi-Fi name and password — the device cannot use 5 GHz networks.

Step 1 — Connect the device

Plug in the USB cable, then click Connect and pick the device from the list. It may show as USB Serial, CP210x, CH340, or USB JTAG/serial.

Step 2 — Enter your Wi-Fi

Enter your 2.4 GHz Wi-Fi network name and password. Network names containing the "|" character are not supported here — contact AMR Performance for help.

Step 3 — Start the update

The device joins your Wi-Fi and downloads the update, which takes a few minutes. Keep the page open and do not unplug the device — it reboots on its own when it is done. If the update fails, copy the device log shown on the page and send it to AMR support.

Need a hand?

Email sales@amrperformance.com.

Shop

Shop all ECU, TCU and CPC calibrations