M177 Tune — Mercedes-AMG 4.0L Twin-Turbo V8

What the M177 is The M177 is Mercedes-AMG's 4.0-litre twin-turbocharged V8. Its two twin-scroll turbochargers sit inside the vee of the engine, the "hot-V" layout, which keeps the path from exhaust port to turbine short. AMG uses it across its 63 and 55 models and supplies it to Aston Martin for the V8 Vantage, DB11 and DBX. Its close sibling, the dry-sump M178, powers the first-generation two-door AMG GT. This page covers the M177. Cars that use the M177 Mercedes-AMG C63 / C63 S (W205, 2015–2023): C63 tuning Mercedes-AMG GLC63 / GLC63 S (X253): GLC 63 tuning Mercedes-AMG E63 / E63 S (W213, 2018–2023): E63 tuning Mercedes-AMG S63 (W222, 2018–2021): S63 tuning Mercedes-AMG G63 (W463, 2019+): G63 tuning Mercedes-AMG GT63 / GT63 S 4-Door (X290): GT63 tuning Mercedes-AMG GT55 / GT63 (C192) and SL55 / SL63 (R232) Mercedes-AMG GLE63 / GLE63 S (W167, C167 Coupe): GLE63 tuning Mercedes-AMG GLS63 (X167): GLS63 tuning Aston Martin Vantage (2019+), DB11 V8 (2018+), DBX and DBX707: Vantage , DB11 , DBX , DBX707 Sharing an engine does not mean sharing a file. The factory output of these cars ranges from 469 hp to 707 hp, and each one pairs the engine with its own gearbox and control modules. AMR writes a separate calibration for each vehicle, which is why the figures below differ from car to car. What an AMR M177 tune changes ECU. The engine calibration. The ECU files below are sold as Stage 1, with figures as published on each product page: Vehicle AMR Stage 1 ECU C63 (2015–2018) +151 hp, up to 620 hp / 700 tq C63 S (2015–2023) +117 hp, up to 620 hp / 700 tq E63 / E63 S (COMPORT iPRO packages) Up to 705 hp / 750 tq S63 (2018–2021) +105 hp / +155 tq SL55 / SL63 +130 hp / +150 tq GT55 (C192) Up to 600 hp / 650 tq Vantage (2025–2026) / Vantage S Up to 740 hp / up to 750 hp DBX707 +60 hp The GLC63, G63, GT63 4-Door, GLE63, GLS63, DB11 V8 and DBX figures are on each product page. TCU. The gearbox has its own controller. AMR TCU files are listed for the E63, G63, GLC63, GLE63, GT63 4-Door and S63, and CleanSpeed™ TCU software for the C63 and C63 S. CPC. On these Mercedes models the CPC sits between the ECU and the TCU, and it caps torque, boost and speed independently of the engine tune. The AMR CPC is a direct replacement module, ordered new from Mercedes-Benz and programmed for your car. It lifts those limits and adds engine and intercooler cooling changes. Allow up to 14 days for preparation. Why upgrade the CPC . How it is installed COMPORT iPRO, at home: wireless over the OBD port, using your phone. This is how the E63 / E63 S iPRO packages install. iPRO guide Authorized dealer: the other Mercedes M177 ECU and TCU files, including the CleanSpeed™ TCU software, can be installed by an authorized AMR dealer . Most of them also offer an at-home OBD flash device as an option on the product page. ECU ship-in: for the SL55 / SL63 and GT55 / GT63 (C192) files, the ECU can instead be removed and sent in to be written. CPC: the AMR module replaces the factory unit. CPC installation guide Fuel and hardware The M177 ECU files are built for 91/93 octane pump fuel; the C192 GT55 and GT63 files list 93 octane. None require hardware changes. For downpipes, talk to an Authorized ProTuner. Emissions and road use Emissions status is set product by product. Read the product page and our Emissions Compliance & Regulatory Use Agreement before you buy, and check the rules where you drive.

49 M177 Tune — Mercedes-AMG 4.0L Twin-Turbo V8 calibrations

Related model tuning pages

Vehicles we calibrate

Every AMR Performance file is built for one specific vehicle. These are the makes we develop ECU, TCU and CPC calibrations for.

Shop

Guides

AMR Performance

Policies